“Corky” or “Corked” Wine
Occasionally, a bottle of wine may be contaminated
by a fungus-infected cork. This can result in what is referred to
as “corky” wine, or “corked” wine. This situation
is somewhat prevalent, with some experts estimating that as many as
5% to 10% of wines having this problem. Screw caps and synthetic corks
would prevent this problem, and much of the industry is headed in
that direction. Corked wine will have a musty, moldy smell and taste,
somewhat like wet cardboard or mushrooms, and should be returned to
the place of purchase for a refund.
Back to Top
Oxidation
Exposure to extreme heat, severe temperature fluctuations,
as well as damage or deterioration of the cork, can lead to oxidation
of the wine. Such a wine will be thin and lose aroma and flavor. To
check for oxidation, raise your glass of wine to a white background.
The color should be free from browning, a sure sign of oxidation.
Some experts predict that as much as 25% of wine sold in the U.S.
has been damaged due to exposure to extreme heat.
One sign of possible wine damage is a raised cork. Such a condition
is caused when the wine has gotten too warm, and the contents of the
bottle expand, pushing upward on the cork. This allows oxygen to enter
the bottle and may cause spoilage of the wine (oxidation).
When the cork is removed from a bottle of wine, it should be inspected
to ensure that the bottom is moist with wine, but that this moisture
has not run the length of the cork to the top. Such a condition indicates
that the seal has been lost, and the wine would be subject to oxidation.
(It is not necessary to smell the cork, as there is no useful purpose
in doing so.)
Another sign of a wine problem is that the fill line has dropped.
The typical wine level in the bottle is into the neck. A lower fill
level indicates wine leakage or evaporation, which often results in
oxidation of the wine. Very old wines may have a slight decrease in
the fill level due to their age. Wines that are less than four years
old with greater than one half inch of air space (ullage) between
the cork and the liquid level of the bottle generally indicates a
problem. Normally, about one eighth inch of fill space is created
during the bottling process.
Back to Top
|
